MLS Laser Care

Maintenance Regular maintenance and care for your MLS laser equipment will ensure its longevity and optimal performance. By investing time and effort into taking care…

Service M6

Daily Keep unit clean and uncontaminated – see  Lesson “Cleaning and disinfection“ The device and the laser applicators must not be cleaned or come in contact…

Cleaning and disinfecting M6

WARNING: DO ALL THE CLEANING WHEN THE UNIT IS SWITCHED OFF AND THE POWER CABLE IS DISCONNECTED. It is suggested that the exterior of the…

Personalising M6

Personalise your laser Select C from the home screen Each person that uses the laser can have their own ID and password to operate the…

Manual mode M6

The management software for the device is structured to allow for different approaches to treatment. This lesson shows how to manually input all parameters for…

Treatment considerations M6

Laser therapy penetration Laser can reflect of objects – remove metal objects on patient from treatment area (watches, jewellery, rings) The laser therapy must be…

Laser emission screen M6

After pressing the START button Sample screen for handpiece or multidiode: A – Indication of treatment program underway B – Treatment parameters in use After…

Biostimulating M6

Select Biostimulating from the home screen. Handpiece A – Treatment indication. Biostimulating B – Treatment area setting C – Indication of energy density In Biostimulating…

Anti-oedema M6

Select Anti-oedema from the home screen. Handpiece A – Treatment indication. Anti-oedema B – Treatment area setting C – Indication of energy density In anti-oedema…

Area mode M6

Area mode treatment involves using the settings on the lower half of the screen. Note: This section only applies to channel 1 handpiece.  After selecting…